一：Artificial stone vacuum equipment structure

Artificial stone vacuum equipment is mainly used in some large size products, such as artificial stone setting wall, artificial stone plate, stairs, handrails.Is due to the vacuum negative pressure toward internal suction, vacuum box size bigger then vacuum pumping speed need to increase,Therefore, the design of strong internal reinforcement, not only the appearance of beautiful, clean, also let the artificial stone vacuum equipment not deformation.The door is opened by double doors, one in and one out, automatic lift up and down, saving time and effort.

二：Artificial stone vacuum equipmen tintroduce

Its main function is to remove the air, gas, and increase the density of the product. In some processes, it is more important to improve the color of the product. There is a set of good vacuum equipment to make a good product. Please contact us in detail.

三：Artificial stone vacuum equipment Notice the choose and buy

1.size：The size is designed according to the size of your product. The bigger the product size is, the bigger the design of artificial stone vacuum equipment will be.

2.parameter：Customize according to the type of product

3.Vacuum pressure：In this process, the higher the pressure, the better the foam removal effect, the more beautiful the product is made.

四：Artificial stone vacuum equipment Application industry

Large vacuum defoaming equipment is mainly used for artificial jade, crystal stone, artificial stone, quartz crystal, artificial light equipment production line, artificial stone bathtub, artificial jade background wall, artificial stone plate, artificial hills, stone, high-grade artificial marble, man-made stone mesa man-made landscape culture stone, artificial granite, marble, stone, artificial stone vacuum pump, etc., vacuum equipment size is standard products customized according to user needs. , commonly used in stone slab equipment degassing defoaming and vacuum equipment he mainly consists of belt conveyor, vacuum, vacuum pump, pneumatic lift system, automatic detection and control system, etc.
Design and manufacture according to different requirements of customers; The materials are either stainless steel or carbon steel. The vacuum pump can be matched. 

五：Artificial stone vacuum equipment The installation

1.Connect the suction port on the left side of the Vacuum box and the exhaust port above the Vacuum box to connect the ball valve. The Vacuum box is connected to the Vacuum gauge on the other side (all of them should be sealed with tape to prevent leakage).
2.Install the lampshade and energy-saving lamp in the light hole at the top of the Vacuum box. The lamp cover is connected to 220V voltage and connected to the power supply, which can be seen from the perspective hole in the Vacuum box to see the defoaming condition of the product in the Vacuum box.
3.Vacuum box on the left side of the Suction caliber fitted Globe valve, connector installation, a line to connect to the Vacuum pump, is connected to the Vacuum pump is ready (use sealing tape to prevent leakage).
4.The power supply of the vacuum pump adopts the 380V/50HZ grounding wire
六：Artificial stone vacuum equipment.操作方法：
1.The first Vacuum box is closed, Pressure relief valve closed, Suction valve to open. Then the Vacuum pump is connected to the power supply by 380V, and the air in the Vacuum box is started. When the Vacuum gauge is shown as -0.1mpa, the connection and sealing of the Vacuum box and the Vacuum pump are very good. (if the Vacuum gauge does not reach -0.1mpa, check for installation and check that the Vacuum box is not properly sealed).
2. After checking the Vacuum box and Vacuum pump, you can start work. Products to be included in the Vacuum box, open the Suction valve, close the Pressure relief valve, Vacuum pump is connected with the power of the lamp shade, Vacuum equipment have started to work, when the digital display on the Vacuum gauge is 0.1 Mpa, said is normal, then can view from the window. When the product is no bubbles, close Vacuum box on the Suction valve, close Vacuum pump power supply, open the Vacuum box on the Pressure relief valve, can open the Vacuum box to take out the product, such a work cycle is completed.
七：Artificial stone vacuum equipment maintain
When using vacuum box, we must regularly clean up, check whether the sealant strip is damaged or not, and replace it in time. The door of the box should not be overpowered and pulled. At the same time, attention should also be paid to lighting holes and perspective holes to prevent breakage.

八：Artificial stone vacuum equipment.尺寸

五：Artificial stone vacuum equipment.产品实拍图